noun
definition
A strong paper coated with sand, ground glass, or other abrasive material for smoothing and polishing.
definition
A sheet of such paper.
verb
definition
To polish or grind (a surface) with or as if with sandpaper.
Examples of sandpaper in a Sentence
The old door felt like a piece of rough sandpaper.
Next, use fine grain sandpaper to remove any remnants of paint and to smooth over any nicks or marks in the piece.
No tree in the wild has sandpaper covered branches.
The hardware store had a wide variety of abrasives, like sandpaper, in stock.
Follow that with a fine-grained sandpaper to create a smooth surface.
Once the paint is dry sand it with a fine grit sandpaper to smooth it out.
At first few Chinese identified with or enjoyed Cui 's provocative lyrics and sandpaper vocals.
First, use 150 grit sandpaper to smooth out the surface of the chalkboard.
Using a dry felt cloth, wipe away the dust left by the sandpaper.
Be sure to use a light-grit sandpaper so that you don't create any gauges or major scratches.
Use sandpaper to smooth a surface before applying contact paper.
Lightly run over your sticker with sandpaper to give it a distressed look.
Score the paper backing with a stripper, a putty knife, coarse sandpaper, or a razor blade, to make the water soak in easier.
Once the wall dries, use sandpaper to carefully remove any adhesive you missed.
You'll also need several strengths of sandpaper.
While it is still wet, sand it with a piece of 800 grit sandpaper.
Then follow up with a sanding with the 800 grit sandpaper, then the 1000, then the 1500 and then the 2000 grit sandpaper.
The sander itself is a random orbital sander to avoid leaving marks on your floor from the sandpaper.
Medium grit sandpaper - If the floors have a few dings and the polyurethane is wearing thin in spots, you can get by with 120 grit sandpaper.
This sandpaper wears out pretty quickly, so you will want to purchase several sheets.
How well you sand the floors with fine grit sandpaper dramatically affects the end result.
Use 100-grit sandpaper to dull the shine on the existing laminate.
After the first and second layers are applied and dried, sand the counter with 220-grit sandpaper so the next layer adheres properly.
Sand and clean the laminate countertop using 100-grit sandpaper.
If need be, after they are completely dry, you can restore the nap by "gently" rubbing them with fine sandpaper or an emery board.
This means that the dirt is acting like a real fine sandpaper against the rubber.
Sandpaper - This is to sand the plaster breast forms smooth before you pour in the liquid latex.
You can achieve this by using a medium-sized piece of sandpaper.
Now you must smooth your wand with sandpaper.
Mineral, vegetable and animal substances, by means of tools and apparatus of stone, wood and bone - tools for cutting, or edged tools; tools for abrading and smoothing the surfaces of substances, like planes, rasps and sandpaper; tools for striking, that is, pounding for the sake of pounding, or for crushing and fracturing violently; perforating tools; devices for grasping and holding firmly.
Quartz is a valuable grinding and polishing material, and is used for making sandpaper and scouring-soap. It is also largely used in the manufacture of glass and porcelain, "silver sand" being a pure quartz sand.
Predation losses were determined by lightly gluing giant foxtail and velvetleaf weed seeds onto squares of sandpaper.
Chrissie Hynde, on the other hand, is the sandpaper of the veggie movement, the carborundum stone, the nutmeg grater.
The loose carbon (burnt wood) was removed using a kitchen scouring pad rather than sandpaper.
Always sand with the grain of the wood and wrap the sandpaper around a block of wood so that it gives an even surface.
To prepare wood, lightly abrade the surface using a dry sandpaper, rubbing in the direction of the grain.
For new wood, prime the surface with Primer, allow to dry, and sand with medium grade sandpaper.
Compounds are coarse polishes which use aluminum oxide as an abrasive agent, the most severe of which is like liquid sandpaper.
Rub down the corners and edges of the plate with low grade sandpaper to avoid finger injuries!
Sand the filled slot smooth using a sanding block with 180 grit sandpaper.
In either case you will need to clean off any flashing and/or seam lines with a sharp knife and/or fine sandpaper.
Now roll out the clay into the desired shape and rough the outside using either some course sandpaper or your ball of silver foil.
Using a coarse sandpaper, lightly remove some of the paper, leaving a mottled wash with highlights.
Allow to dry 24 hours and sand (using a pad or sandpaper grade 150/200) between coats.
Rub down the corners and edges of the plate with low grade sandpaper to avoid finger injuries !
If it's just a small amount, try sanding it down with a light-grit sandpaper to smooth it out and then apply a small amount of varnish with a foam brush.
Try using a scouring pad or some light sandpaper to try to remove it.
Sanding - After you have scraped most of the old paint off of the beadboard, go over the surface with a medium-grained sandpaper to remove any residual paint.
Fine grit sandpaper - You need to purchase 220 grit sandpaper in order to make sure your floors are smooth to the touch and any marks left by previous sanding are gone.
Surf boarders know that blowing sand can stick to the wax on their boards, making the surface feel like sandpaper rubbing against their flesh.