noun
definition
A thin mortar used to fill the gaps between tiles and cavities in masonry.
definition
Coarse meal; groats.
definition
(typically used in the plural) Dregs, sediment.
definition
A kind of beer or ale.
verb
definition
To insert mortar between tiles.
example
I spent the whole afternoon grouting the kitchen floor.
Examples of grout in a Sentence
The grout, which he mentions as " coming over to us in Holland ships," about which he desires information, was probably the same as shelled barley; and mills for manufacturing it were introduced into Scotland from Holland towards the beginning of the 18th century.
Wipe tiles with a damp cloth or sponge to remove excess grout.
For crack width between 1.0 - 3.0 mm cement grout can be injected instead of epoxy resins.
Dry mines are filled by drilling down through the roof and pumping in liquid grout and allowing it to set.
Down these holes cement grout was injected under high pressure on the system of Mr Kinipple.
To grout the tile joints in the pool, ARDEX-FLEX FL gray rapid setting flexible grout the tile joints in the pool, ARDEX-FLEX FL gray rapid setting flexible grout was used.
Divers injected grout into voids under the weir to stabilize it.
Or how to clean the grout in between bathroom tiles, .. .
The first, inner curtain will be formed at a relatively low pressure using a blocker grout.
Click here to calculate how much cement-based grout is required for your project.
A flexible grout is recommended with both of these methods.
Erosion of tile grout is the most common indicator that the water is calcium hungry.
Let job stand for about 5 minutes then wipe the tiles and grout joints with a dry lint free cloth.
Mix the Grout to the manufacturers recommendations and then spread it over the tiles using the rubber squeegee.
Keep your floor tiles as large as possible to minimize grout lines and create the illusion of open space.
Chalkboard paint is essentially flat latex paint that is mixed with unsanded tile grout.
When the paint is mixed with the tile grout, it creates a surface that you can write on with chalk and erase.
Start with a can of flat finish latex paint, stir in unsanded tile grout and glaze medium, and you're ready to go!
Use a tile and grout cleaner to do the job.
Large format tiles will give you fewer grout lines, leading to a contemporary look.
Mildew removal from unsealed grout can be a challenge, but it is still easier than removing grout.
Once you get it cleaned and dried be sure to seal the grout to make cleaning easier in the future.
Apply to grout, let it stand for about 10 minutes, and scrub with a stiff brush.
Sprinkle baking soda directly onto the stained grout, add vinegar to produce a fizz.
Use tile treatments that have narrow grout lines on the floor and walls.
For especially realistic flooring, look for laminates with beveled grooves to emulate wood planks or stone grout joints.
Don't forget to allow some space for the grout that will go between them.
Put spacers between the tiles to ensure there's enough room between them for the grout.
Cleaning excess grout off the tiles will likely require you to dampen the sponge or rag many times.
New ceramic tiles are available in vitrified, large format tiles that can be butted together with almost no grout joint.
Always run a fan in the bathroom while showering to help remove moisture, and seal your grout joints to keep mold from gaining a toe hold.
You can also cut away and remove old grout and caulk that's been stained with mold and mildew in the bathroom to keep it from spreading.
Just make sure you clean the areas behind the old grout or caulk well with a natural mold killer, in case the damage has already started to spread.
The downside of ceramic tiles is keeping the cement grout line between each tile clean and in good repair.
Grout lines tend to get dirty and crack or chip over the years.
While the grout lines are typically wider, the tiles can be laid in intricate patterns that continue up the backsplash.
Once all the tiles have been set, apply the grout to the spaces between the tiles.
After 10 to 15 minutes, clean off any excess grout using a damp sponge and buff clean with a dry cloth.
Swirled patterns and busy granites can help mask grout joints and make them less visible.
Grout joints help keep the rows of tile even and square, while lending stability to the job.
For best results, use an unsanded grout in a 1/16-inch grout joint on the counter and edges.
Choose a grout color that matches the lightest tone in the granite to help it blend in and hide.
One problem is that the grout between tiles deteriorates over time and can discolor if not sealed regularly.
Carpet tiles do not have grout lines to be maintained, and can be vacuumed, steamed or spot treated like regular carpet.
If you have a tiled shower, clean it thoroughly and apply some fresh grout to the seams if it's been a while.
Pavers - Deck pavers can be made from concrete, travertine or other natural stones and can be sand-set instead of using mortar and grout.
Outlet covers, baseboards, tile trim pieces, grout and paint primer are frequently overlooked during the planning stages, but still get tacked on at the end.
Keeping grout clean is the type of chore that needs to be done and that no one enjoys doing.
Here are some suggestions for cleaning grout organically.
Apply it to the tiles and grout with a soft brush.