verb

definition

To provide with gearing; to fit with gears in order to achieve a desired gear ratio.

definition

To be in, or come into, gear.

definition

To dress; to put gear on; to harness.

definition

(usually with to or toward(s)) To design or devise (something) so as to be suitable (for a particular type of person or a particular purpose).

example

They have geared the hotel mainly at tourists.

definition

To borrow money in order to invest it in assets.

noun

definition

The ratio of a system of gears.

example

The 4×4 could climb well, as it had relatively low gearing.

definition

Harness; working implements.

definition

A train of toothed wheels and pinions.

Examples of gearing in a Sentence

It took her a few minutes to become accustomed to the gearing, but she was shifting smoothly much quicker than he expected.

The manufacturers are gearing their designs to this fact.

For otitside gearing that ratio is negative, Cs because the wheels turn contrary ways; for inside gearing it is positive, because they turn the same way.

On the tail rope plan the engine has two drums worked by spur gearing, which can be connected with, or cast loose from, the driving shaft at pleasure.

This system presents the greatest advantages in point of economy of driving power, especially where the gradients are variable, but is expensive in first cost, and is not well suited for curves, and branch roads cannot be worked continuously, as a fresh set of pulleys worked by bevel gearing is required for each branch.

When a shaft is driven by means of gearing the driving torque is measured by the product of the resultant pressure P acting between the wheel teeth and the radius of the pitch circle of the wheel fixed to the shaft.

Toothed gearing connected with the gun mountings actuates a rack attached to the standards carrying the sights, so that any movement of the gun mounting is communicated to the sights.

This, and the sky searching previously mentioned, means increased internal gearing and a larger upper tube.

When the point of contact of two wheels lies between theim centres, they are said to be in outside gearing; when beyond theii centres, ip inside gearing, because the rolling surface of the larger wheel must in this case be turned inward or towards its centre.

Engines, and iron and steel ships are built at a shipyard 2 on the Fore river, and tubular rivets and studs, gearing, foundry products, and translucent fabrics are among the city's other products.

The toothed wheels give a slightly better efficiency, but the worm gear is somewhat smoother in its action and entirely silent; the noise of gearing can, however, be considerably reduced by careful machining of the teeth, as is now always done, and also by the use of pinions made of rawhide leather or other non-resonant material.

Worm wheel gearing is of very high efficiency if made very quick in pitch, with properly formed teeth perfectly lubricated, and with the end thrust of the worm taken on ball bearings.

Much attention has been paid to the improvement of the mechanical details of the lifting and other motions of cranes, and in important installations the gearing is now usually made of cast steel.

At the receiving end of the circuit a shaft is coupled to the motor; this is provided with gearing which rotates four combining commutators and four type-wheels, which print the letters on the band of paper.

Other special types are in limited use for " rack-railways," and operate either by engagement of gearing on the locomotive into a rack between the track rails, or by a combination of this and rail adhesion.

In geared hoists the drums. are on a separate shaft, driven from the crank-shaft by tooth or friction gearing, and make one revolution for, say, 4 or 5 double strokes.

It is driven by a powerful engine through triple gearing of 42 to 1, and speeded to have a surface velocity of rollers of 15 ft.

The crusher is preferably driven by an independent engine, but with suitable gearing it can be driven by the mill engine.

This consists of a cast-iron pan having a shallow cylindrical bottom holding mercury, in which a wooden muller, nearly of the same shape as the inside of the pan, and armed below with several projecting blades, is made to revolve by gearing wheels.

Finally the hand-wheel 80 is connected by gearing to the rod carrying the hand-wheel 79, and it can thus be used to give the latter a more rapid motion than if used direct; this constitutes the third speed of movement.

This wheel is mounted on a carrier which, being movable about its centre by a screw gearing worked by hand, gives a radial sweep to the cutting edges.

The chief piece of mechanism in the roving frame is the gearing known as the "differential motion."

Die cast machine heads, where the gearing is all encased, is used.

This simple form of crane thus embodies the essential elements of foundation, post, framework, jib, tie-rods and gearing.

The material is placed in a perforated cage or "basket," which is enclosed in an outer casing, and when the cage is rapidly rotated by suitable gearing, the liquid portions are forced out into the external casing.

It is unnecessary to give separate figures and demonstrations for inside gearing.

The poise having arrived at the end of its run and unable to go further, the mitre wheels and the sprocket gearing are stopped, and the two pulleys and the cross belt run idle till the.

The value d/D usually lies between the limits io/i i and 15/16, and, if a greater difference of E from R is required, a further mechanical advantage can be obtained by employing a separate hand-wheel and chain, or by forming the upper sheave with an annular spurwheel gearing with a pinion driven by a hand-wheel and chain, as in the Tangye form of Weston pulley-block.

The worm-wheel shaft then sometimes carries a spur-pinion gear ing with a spur-wheel on the lifting shaft, whereby a much greater mechanical advantage is obtained with a small loss by friction of the spur gearing.

And all the signs are that the party's warring factions are gearing up for another round of internal bloodletting.

The standard gearing is suited to a slow pedaling cadence.

Sony seems to be gearing up for the games to be streamed over a broadband network.

Because the Taffspeed exhaust has so much low down power higher gearing can be used to compensate for more top end speed.

Siem Reap is gearing up for a massive tourist influx.

The North East Community Forests tree nursery is gearing up to meet the growing demand for locally grown trees.

However, the high torque figure at lower revs allows for high gearing, which in turn makes for good motorway economy.

The engine revs need to be kept higher to achieve the performance, best to use low gearing.

If you fit a sidecar to a motorcycle you really need to reduce it's gearing to cope better with the extra load.

By changing the front sprocket to a higher number of teeth, you will raise the gearing.

When gearing down, it is easier to fit a smaller front sprocket than a bigger rear.

Now he is gearing up to take part in the grueling Ironman triathlon when it comes to Sherborne Castle later this month.

With the exception of a few special cranes in which friction wheels are employed, it is universally the practice, in steam cranes, to connect the engine shaft with the barrel shaft by spur toothed gearing, the gear being connected or disconnected by sliding pinions.

There are many other important points of crane construction too numerous to mention here, but it may be said generally that the advent of electricity has tended to increase speeds, and in consequence great attention is paid to all details that reduce friction and wear, such as roller and ball bearings and improved methods of lubrication; and, as in all other quick-running machinery, great stress has to be laid on accuracy of workmanship. The machinery, thus being of a higher class, requires more protection, and cranes that work in the open are now fitted with elaborate crane-houses or cabins, furnished with weather-tight doors and windows, and more care is taken to provide proper platforms, hand-rails and ladders of access, and also guards for the revolving parts of gearing.

The latter consists of a framework carrying the hoisting barrel, with its driving motor and gearing, and a travelling motor, which is geared to the running wheels in such a manner as to be able to propel the whole machine; FIG.

It consists of a long screw spindle, coupled by suitable gearing with the cable drum, and thus rotating at the speed of the outgoing cable; on this screw works a nut which forms the centre of a thin 'circular disk, the edge of which is pressed against the surface of a right circular cone, the line of contact, as the nut moves along the screw, being parallel to the axis of the latter.

Of these features, the blast-pipe had been employed by Trevithick on his engine of 1804, and direct driving, without intermediate gearing, had been adopted in several previous engines; but the use of a number (25) of small tubes in place of one or two large flues was an innovation which in conjunction with the blast-pipe contributed greatly to the efficiency of the engine.

If you fit a sidecar to a motorcycle you really need to reduce it 's gearing to cope better with the extra load.

Whether you are gearing up to document New Year's Eve, Fourth of July or Memorial Day celebrations, you'll want to know how to photograph firework displays before taking aim at the night sky.

Scheduled for August 11-12 in Scotland, the popular event is gearing up for its third year.

The grapes are ready and the wineries are gearing up for what we call "crush".

Disclaimer

Scrabble® Word Cheat is an incredibly easy-to-use tool that is designed to help users find answers to various word puzzles. With the help of Scrabble Word Cheat, you can easily score in even the most difficult word games like scrabble, words with friends, and other similar word games like Jumble words, Anagrammer, Wordscraper, Wordfeud, and so on. Consider this site a cheat sheet to all the word puzzles you have ever known.

Please note that SCRABBLE® is a registered trademark. All intellectual property rights for the game are owned by Hasbro Inc in the U.S.A and Canada. J.W. Spear & Sons Limited of Maidenhead, Berkshire, England (a subsidiary of Mattel Inc.) reserves the rights throughout the rest of the world. Also, Mattel and Spear are not affiliated with Hasbro. Words with Friends is a trademark of Zynga with Friends.

Scrabblewordcheat.com is not affiliated with SCRABBLE®, Mattel Inc, Hasbro Inc, Zynga with Friends, or Zynga Inc in any way. This site is only for entertainment and is designed to help you crack even the most challenging word puzzle. Whenever you are stuck at a really difficult level of Scrabble or words with friends, you will find this site incredibly helpful. You may also want to check out: the amazing features of our tool that enables you to unscramble upto 15 letters or the advanced filters that lets you sort through words starting or ending with a specific letter.

Top Search