noun
definition
A rotating mass used to maintain the speed of a machine within certain limits while the machine receives or releases energy at a varying rate.
Examples of flywheel in a Sentence
When but one flywheel is used, it should be placed in as direct connection as possible with that part of the mechanism where the greatest amount of the periodical excess originates; but when it originates at two or more points, it is best to have a flywheel in connection with each of these points.
The fluid flywheel provided on this engine was designed to slip until full throttle was required in top gear.
For example, in a machine-work, the steam-engine, which is the prime mover of the various tools, has a flywheel on the crank-shaft to store and restore the periodical excess of energy arising from the variations in the effort exerted by the connecting-rod upon the crank; and each of the slotting machines, punching machines, riveting machines, and other tools has a flywheel of its own to store and restore energy, so as to enable the very different resistances opposed to those tools at different times to be overcome without too great unsteadiness of motion.
The latter was driven via a flywheel weighing about 2 tons, made from a solid aluminum bronze casting.
But the UK way is to machine down the fins to original size and use a standard flywheel cowling.
We find the flywheel is too heavy for SX and Li type crankshafts as the taper is thin and tends to shear or spin.
Next addition to the block is a lightened flywheel, then cams.
It then started to dawn on me that I could have fitted the wrong flywheel.
To get the flywheel off requires removal of the nearside rear wheel.
I'm also pretty sure that the 325 has a lighter flywheel.
This mechanism then uses the rapidly spinning flywheel via the gears to rotate the final drive axle slowly.
A balanced 1kg steel flywheel gives a smooth pedaling action.
The worse case for a heavy flywheel set up was the Spanish Motoplat electronic system, which was used on SX cranks.
The MBD conversion to strengthen the Indian electronic flywheel.
The engine itself had a single horizontal cylinder and a large flywheel.
The engine included the Villiers flywheel magneto, with the engine cooling fan mounted on the outside of the flywheel magneto, with the engine cooling fan mounted on the outside of the flywheel.
This version of the factory tool holds the flywheel properly while you remove and refit the flywheel nut.
No balance hole features and has the shortest flywheel side seal shoulder of 10mm to suit a wider flywheel side seal shoulder of 10mm to suit a wider flywheel bearing than all other crankshafts.
Fitting flywheel weights helped to cure the problem, showing that too small a flywheel weights helped to cure the problem, showing that too small a flywheel was no good.
As with all GP type flywheels used on fast tuned engines the die cast flywheel would crack around the boss and break!
The engine included the Villiers flywheel magneto, with the engine cooling fan mounted on the outside of the flywheel.
The Toda flywheel is marketed as ' ultra light ' and is manufactured from chromium molybdenum steel for the highest quality.
At the flywheel end remove No1 bearing you may find a spacer shim in front of the bearing do not loose it.
This flywheel merely served to maintain smooth rotary motion; the engine actually actuated a pair of reciprocating ram pumps.
I 'm beginning to think I should have got a later style starter to match the flywheel on the recon engine.
The flywheel suffered a far worse fate - being sold for scrap to the British Iron & Steel Corporation at Bedford and smelted down.
Each bike has a resistance knob that allows the rider to adjust the tension against the flywheel, making it easier or harder to pedal.
The lever M worked from the front of the machine causes the flywheel to be connected with the driving-wheel and the machine starts.
Flywheels.A flywheel is a rotating piece in a machine, generally shaped like a wheel (that is to say, consisting of a rim with spokes), and suited to store and restore energy by the periodical variations in its angular velocity.
Let e denote the quantity by which the energy exerted in each cycle of the working of the machine alternately exceeds and falls short of the work performed, and which has consequently to be alternately stored by acceleration and restored by retardation of the flywheel.