Word Finder - drywall

definition

A building material comprising a sheet of gypsum sandwiched between two pieces of heavy paper, used mainly for interior walls and ceilings.

definition

A wall made of this.

definition

A stone wall constructed without mortar or cement.

definition

To install and finish drywall.

If you install a rod with a simple screw into drywall, don't expect it to support much weight.

Selecting the right tools diy drywall repair and cabinet jack Specializing in diy drywall repair, cabinet jack and cabinet tool.

If not, buy specialty drywall screws that will expand and grip the wall from the inside, providing extra support.

This goes for drywall, metal, stucco, stone and brick installations too.

Some paints roll over drywall and paneling well, but what about textured surfaces or plaster?

If the walls are straight drywall do not soak them.

With recessed lighting, you would have to do a drywall repair job complete with a new piece of drywall, tape, sanding and mudding.

Your lighting will fall if you screw it into the drywall or plaster on your ceiling.

Instead of trying to handle nail guns, power tools or costly glues, no nailing crown molding is installed with adhesive caulk or drywall compound.

This site features videos on a variety of topics from fixing a dripping faucet to repairing a crack in drywall.

Chunks of drywall often come off with the crown molding, making it essential that the tops of the walls be refinished before painting.

When affixing drywall to the framing members, be sure to protect your door from scratching by using construction adhesive instead of nails or screws.

They can be a good alternative to drywall ceilings.

There are many benefits to using a drop ceiling instead of a standard drywall ceiling.

They are inexpensive - Drop ceiling installation costs just a fraction of what a drywall ceiling costs.

Do it yourself drywall installation isn't difficult, but you do need to have the right tools and take the time to create smooth finished seams.

Drywall typically comes in four-foot by five-foot sheets and in thicknesses between a quarter and five eighths of an inch.

Paper sheets with a gypsum core, drywall is relatively easy to work with, but can be fragile.

There are specialty drywall preparations and configurations that are available if you need them, including longer and wider sheets, and water resistant backboard that's usually sold as a smaller panel and used as a backing for tile.

Buy drywall sheets that are the same length as your wall.

Use drywall screws instead of nails, they're less likely to pop out or cause problems later.

To make accurate cuts, use a utility knife and drywall T-square to make scoring cuts through the top layer of drywall paper and into the underlying gypsum.

Maintain a small gap of about a half-inch between the bottom of the drywall panel and the floor.

Cut openings in drywall panels for doors and windows before hanging them.

The chalk will transfer to the back of the drywall panel and you can use it as a cutting guide.

Instead of powder, use a premixed joint compound to fill drywall seams.

It may save you from having to drag out the sander to complete your do it yourself drywall installation.

The legs should be touching the plaster or drywall.

When finishing a room, having the right drywall installation technique can mean the difference between a professional looking job and one that looks patched and bumpy.

Drywall, or wallboard, is a sandwich of fire resistant gypsum between two layers of heavy-duty paper.

Drywall comes standard in four-foot widths and is available in a variety of lengths.

If you're installing drywall from scratch, start with the ceiling and work down.

Although drywall isn't super heavy, it is cumbersome to work with, especially if you're trying to work solo or with an inexperienced helper.

The edge of a drywall panel will be on one end of the top piece of wood, while you balance and lift it with your foot pressing on the other end of the same piece of wood.

Use a drywall T-square and a new, sharp utility knife to help you.

Score and cut the front face of the drywall with the utility knife, then bend the panel to create a mark on the back paper.

Make small interior cuts in drywall panels, like for switches and small windows, before you nail them into place.

Outline the area with the marker and then lift the drywall panel into position.

A little of the marker will rub off onto the back of the drywall, giving you a cutting guideline.

One of the arts of drywall installation is in making joints that blend so well that they become invisible.

Take plenty of time to fill the recess between the tapered edges of drywall with joint compound.

A six-inch wide drywall taping knife works well for this.

Position drywall tape along the seam and press firmly so that the tape sinks into the compound.

Use a wider drywall knife for this; about eight inches should do it.

Apply a third layer of joint compound using a 10 to 12 inch drywall knife.

Your drywall installation technique will improve as you go, so start in an inconspicuous area and save the most visible wall in your room for last.

When you replace drywall, don't use screws that could scratch the door.

Once you have peeled it off the wall check for any damage to the drywall.

Chances are there has been some water leakage over the years and some parts of the wall may need to be patched, replaced or skim coated.Remove any damaged tiles and cut out damp or wet drywall.

Replace these areas with green drywall, which is designed for damp environments.